SSD Optimization Tips for Better Performance on Windows PC

An SSD or Solid State Drive is a great way to increase your reading and writing speed by leaps and bounds. But there is still a lot you can do to improve performance even further. This article will give you some SSD Optimization Tips For better performance, browse through it and choose what you like.



Best SSD Optimization Tips for Better Performance

Here are the SSD optimization tips to improve performance on your Windows 11/10 PC:

  1. Make sure you have the correct device
  2. Disable fast startup
  3. Enable TRIM
  4. Update SSD Firmware and Driver
  5. AHCI activation
  6. Optimize your SSD with Crucial Storage Executive
  7. Write caching management
  8. Use the high performance power plan

Let’s talk about it in detail.

1]Make sure you have the correct device

You can’t get a random SSD and call it up daily. Each device has specifications and you need to make sure you get the correct one. If you are using a desktop computer and are considering getting a SATA SSD drive, the first thing to check is the availability of slots or cables to connect the device to. Lack of space may require you to connect a Y cable, which is not a bad option, to connect the drive. Other than that, there are different variants, so if the choice is in doubt, try to consult an expert.

2]Disable fast startup

Disable fast startup

SSDs are known to reduce boot time and Fast Boot is supposed to do the same. However, the fast boot up as well as the fast SSD boot speed don’t make much difference. So it would be best to disable fast startup and let your system boot properly. Follow the given steps to disable fast startup.

  1. to open control Board.
  2. going to Hardware and Sound > Power Options.
  3. click Change the Power button action > Change currently available settings.
  4. Deselect Enable fast startup.
  5. Click Save changes.

This will improve your SSD.

3]Enable TRIM

svg %3E

TRIM is a feature that sends signals to an SSD that blocks of data are no longer in use and can be safely erased to be writable again. This improves SSD performance and should be enabled on your system. Windows tends to keep it enabled by default, but we’ll always check to see if the feature is working. To do this, open Command Prompt And run the following command.

fsutil behavior set disabledeletenotify 0

If you see handicapped, Then TRIM is enabled. I know it’s counterintuitive, but read on.

4]Update SSD software and driver

Then try updating the SSD firmware that came with your drive and try updating your device driver. The firmware can be downloaded from the manufacturer’s website, and the device driver can be downloaded in one of the following ways.

This will ensure that you are always up to date.

5]Enable AHCI

AHCI is an acronym for Advanced Host Controller Interface (AHCI), it defines the operation of Serial ATA (SATA) host controllers in a specific non-executive manner in motherboard chipsets. You should enable AHCI from BIOS and improve your experience even more.

6]Optimizing SSD with Crucial Storage Executive

Crucial Storage Executive is a program that helps you optimize SSD. This is the firmware that will take care of your SSD by updating the firmware, driver and other things. So go ahead and download Crucial Storage Executive for free.

7]Manage write caching

One of the most controversial features is write caching. On some systems, this improves the experience, while on others it degrades SSD performance. What we suggest is to try disabling write caching and if you notice a decrease in SSD performance, re-enable it.

8]Use a high performance power plan

Choose a high-performance power plan

Finally, we ask you for a high-performance power plan. This mode works great with an SSD, however, it can drain the battery a bit. So, this is a compromise, but if you’re OK with it, follow the given steps to upgrade to the high-performance power plan.

  1. to open control Board.
  2. going to Hardware and Sound > Power Options.
  3. Select a High Performance Plan or Ultimate Performance Plan.

close control Board, Reboot your computer and your SSD will be optimized.

Read: What you need to do when booting an SSD in Windows 11.

Is optimization good for an SSD?

Yes, optimization is beneficial for everything. However, you need to make sure not to over-optimize things, moreover, many users tend to do redundant things when trying to optimize their devices. So, if you want to optimize your SSD, just make sure to implement the tips mentioned in this guide.

Read: Do you need to defragment the SSD?

Does a larger SSD increase performance?

Yes, SSDs will increase the performance of your system. Not only will they have a faster read and write speed, but they will only speed up the booting process. So if you’re in the market for something to upgrade your system, SSD should be at the top of your list.

This is it!

Read also: Fixed SSD slow read or write speed on Windows PC.

SSD Optimization Tips for Best Performance

Leave a Comment